Catalog
Loading...
Tags
SANDVIK stainless 17-4PH hardened steel speargun shaft with single barb.
Stainless steel shaft manufactured by applying SANDVIK TECHNOLOGY.
Tempered Sandvik Stainless Steel shaft with low profile Euro shark fins designed specifically for use with Roller Spearguns.
The Sigalsub HRC speargun shaft has a superior hardness of 48/50 HRc, which makes it tough enough to survive countless hits in the rocks.
In order to achieve a longer straight flight, the MVD engineers developed a new Smart Notch, that allows you to use the shaft with both dyneema and metal wishbones while maintaining nearly the same ease of loading of a sharkfin shaft.
Tahitian speargun shaft made of Sandvik stainless steel. Extremely hard shaft of 1800 Mpa (~52 Hrc).
In order to achieve a longer straight flight, the MVD engineers developed a new Smart Notch, that allows you to use the shaft with both dyneema and metal wishbones while maintaining nearly the same ease of loading of a sharkfin shaft.
Tempered spring steel shaft with classic American shark fins. This shaft is extremely hard and will withstand serious beating.
This is a special edition of the classic Xifias shafts, made of Sandvik steel and hardened to 1800 Mpa (HRc 50-51).
A great lightweight shaft made by DiverStore specifications, for hunting fast moving fish, where a 'fast" shot is a must.
Standard 7mm Inox shaft with double notches,hardened to 17-4Ph. M7 threaded tip.
Complete instrument for retrieval of shafts and straightening of bent speargun shafts.
A compact and hydrodynamic line slider, suitable for 7mm pneumatic speargun shafts.
Scorpena shaft runner with hydro stopper for 8mm shafts. Two line holes.
Shaft barb o-ring made of silicone for preventing the bottom mounted flopper from opening.
A compact and hydrodynamic line slider, suitable for 8mm pneumatic speargun shafts.Pack of 5pcs.
Epsealon spare long double barbs with pin for Ø7mm shaft
Epsealon Spare Long single barb with pin for Ø6,25mm shaft
This cone, set in front of the flopper, provides smooter penetration of the shaft.
This cone, set in front of the flopper, provides smooter penetration of the shaft.
A rear shaft cap for Mares Sten, Jet and other Mares pneumatic spearguns with 8mm shafts.
A rear cap for Mares CYRANO, STEN 11, CYRANO EVO, CYRANO EVO HF and other Mares pneumatic spearguns with 7mm shafts.
This addaptor allows you to use M7 shat tips on speargun shafts with 6mm thread. Female thread: M6 Male thread: M7
A neat set of 8 shaft o-rings to hold your shaft flopper at place. C4 Carbon made two types of barb retaining o-rings with different hardness 50 shA (black) and 60 shA (red).