Catalog
Loading...
Tags
SANDVIK stainless 17-4PH hardened steel speargun shaft with single barb.
Stainless steel shaft manufactured by applying SANDVIK TECHNOLOGY.
Tempered Sandvik Stainless Steel shaft with low profile Euro shark fins designed specifically for use with Roller Spearguns.
In order to achieve a longer straight flight, the MVD engineers developed a new Smart Notch, that allows you to use the shaft with both dyneema and metal wishbones while maintaining nearly the same ease of loading of a sharkfin shaft.
Tahitian speargun shaft made of Sandvik stainless steel. Extremely hard shaft of 1800 Mpa (~52 Hrc).
In order to achieve a longer straight flight, the MVD engineers developed a new Smart Notch, that allows you to use the shaft with both dyneema and metal wishbones while maintaining nearly the same ease of loading of a sharkfin shaft.
Tempered spring steel shaft with classic American shark fins. This shaft is extremely hard and will withstand serious beating.
This is a special edition of the classic Xifias shafts, made of Sandvik steel and hardened to 1800 Mpa (HRc 50-51).
A great lightweight shaft made by DiverStore specifications, for hunting fast moving fish, where a 'fast" shot is a must.
Standard 7mm Inox shaft with double notches,hardened to 17-4Ph. M7 threaded tip.
This little stainless steel tool can easily save your dive if your speargun shaft gets stuck.
A compact and hydrodynamic line slider, suitable for 7mm pneumatic speargun shafts.
Scorpena shaft runner with hydro stopper for 8mm shafts. Two line holes.
A compact and hydrodynamic line slider, suitable for 8mm pneumatic speargun shafts.Pack of 5pcs.
Shaft barb o-ring made of silicone for preventing the bottom mounted flopper from opening.
Epsealon spare long double barbs with pin for Ø7mm shaft
Epsealon Spare Long single barb with pin for Ø6,25mm shaft
A rear shaft cap for Mares Sten, Jet and other Mares pneumatic spearguns with 8mm shafts.
This cone, set in front of the flopper, provides smooter penetration of the shaft.
This cone, set in front of the flopper, provides smooter penetration of the shaft.
A rear cap for Mares CYRANO, STEN 11, CYRANO EVO, CYRANO EVO HF and other Mares pneumatic spearguns with 7mm shafts.
A neat set of 8 shaft o-rings to hold your shaft flopper at place. C4 Carbon made two types of barb retaining o-rings with different hardness 50 shA (black) and 60 shA (red).
Scorpena spare medium shaft flopper for 6mm speargun shafts. Rivet included.
The shaft cone became an indispensable product in the latest years as it proved to improve the smooth penetration trough the fish.