The C4 L-1090 Pesca carbon blades are intended specifically for freediving and feature a hydrodynamic anti-turbulence flap.
Price is for a single blade! Please allow 2 weeks for shipment if the product is out of stock.
Shipping within 10 days
Warning: Last items in stock!
|General: Best suited for||Spearfishing|
|Fins: Blade Material||Carbon Fiber|
|Fins: Blade Length (Total)||94.00 cm|
|Fins: Blade Width||19.20 cm|
|Fins: Recom. depth||0-40 m|
C4 L-1090 Pesca Carbon Blade
Please allow 2 weeks for shipment.
The C4 L-1090 Pesca carbon blades are intended specifically for freediving and feature a hydrodynamic anti-turbulence flap. These blades are offered three different hardnesses: 25 (soft), 30 (medium) and 35 (medium hard). The surface finish of the blades is carbon fibre with a olive green decoration. These blades are best paired with shoes with a black upper and a green sole.
These blades are specially designed and manufactured with a new progressive lamination of the carbon fiber layers, which is a strict technical requirement for these fins. The lamination combines 4 different types of Japanese carbon fiber, specific for each layer, to optimise the reactivity and resistance of the blades.
The combined use of HT15 carbon externally (exclusive to C4), of intermediate areas with 7 layers of high-strength fabric and a calibrated combination of several unidirectional layers, produces a unique reactivity and an exceptional resistance to stress.
The resistance of these blades has been tested on the C4 robot for over 1.6 million complete cycles and a load three times the one produced by human strength. The specific stratification of the 200 fins has allowed C4 to create extremely resistant blades that allow the spear fishermen who start fishing from shore and who often walk wearing their fins, to be able to do it without any fear of breaking them.
The water rails of the 200 blades are not glued but overmolded on the blades with a specific moulding process that fuses the plastic material with the composite. This innovative production process, which has never been attempted before on composite materials, was conceived by C4 technicians. The plastic polymer used to manufacture the water rails, maintains elasticity four times more over time than normal NBR, the material which is commonly used tom produce the glued water rails. The overmoulding process is an industrial process, perfectly replicated, which avoids any separation that can occur on glued water rails.
The over moulding process has allowed us to create a progressive design of the water rails. The first portion close to the foot features a design ideal for protecting the blade without overloading it with water and without limiting its elasticity. Progressively, the height of the water rails increases becoming an effective guide for the fluid threads, thus preventing load drops and unwanted skidding.
When selecting the hardness, please take into account the recommendations of the manufacturer:
|up to 55 kg / up to 1.50 m||25||25||25|
|55-65 kg / up to 1.50-1.65 m||25||25||25|
|65-75 kg / up to 1.65-1.75 m||25||25/30||30|
|over 85 kg||30||30||30/40|
These blades are compatible only with the C4 200 footpockets!
No customer reviews for the moment.